Aerial view of Sandton's skyline in Gauteng, South Africa, under a clear blue sky

Malbor, Sandton

Gates, fencing and steel work in Sandton

Umdeni Construction is a construction and steel work business in Malbor, Sandton, doing gates, fencing, balustrades, burglar bars, and gate motor installation and repairs.

Use the planner to sketch your gate, fence, balustrade, burglar bars or gate motor, then send it as your message.

Sketch your steel work

A starting point, not to scale. Sizes, finishes and the details of the work are settled when the project is discussed.

4.0 m openingMotor?Sliding gate
What do you need?
How should it open?
4.0 m
1.0 m8.0 m
A gate motor on it?

Your message

Hi Umdeni Construction, I'm looking for a sliding gate for an opening of about 4.0 m, and I'm not sure yet about a gate motor.

Send this on WhatsApp

Gates, fencing, balustrades and burglar bars

Umdeni Construction does construction and steel work in Malbor, Sandton. The drawing shows where each kind of steel work sits on a property, from the boundary fence and the gate to the burglar bars and balustrades on the house.

FENCINGGATEGATE MOTORBURGLAR BARSBALUSTRADE
  • Gates

    Steel gates for driveway and pedestrian entrances, sliding or swing. Measure the opening between the pillars and say how you would like the gate to open.

  • Gate motor installation and repairs

    Gate motors installed on sliding and swing gates, and repairs to gate motors that have stopped working properly.

  • Fencing

    Fencing along a property boundary. Note the length of the boundary, the height you have in mind and where a gate should go.

  • Balustrades

    Steel balustrades for staircases, balconies and landings, wherever a rail is needed along an edge.

  • Burglar bars

    Burglar bars for the windows and doors of a home or business. Count the openings that need them before asking for a quote.

Ask for a quote
Turquoise metal gate with intricate decorative steel patterns
Gates
Security gate with an intercom at a property entrance, seen from a car window
Gates and gate motors
Red steel fence with a warning sign at an industrial site
Fencing

What to measure before you ask for a quote

A gate, fence, balustrade or set of burglar bars is priced on its size and on the spot where it goes. These three checks give Umdeni Construction a clear picture of your steel work before the details are discussed.

Measure the opening or the boundary

For a gate, measure the clear width between the pillars or walls. For fencing, run a tape along the boundary or pace it out, and note each corner. For burglar bars, count the windows and doors and measure each opening.

Note the slope and what is there now

Say whether the ground slopes along the boundary or across the driveway, and what stands there today: a wall, an old fence, an existing gate or nothing at all.

Photograph where the work will go

Take a photo of the pillars for a gate, the full boundary for fencing, the staircase or balcony edge for a balustrade, and the gate and motor itself if a gate motor needs repairs.

Add your measurements to the planner at the top of this page, and attach the photos once the WhatsApp chat is open.

Construction and steel work in Malbor, Sandton

Umdeni Construction is a construction business whose work is steel work: gates, balustrades, burglar bars, fencing, and gate motor installation and repairs.

A new gate across a driveway, a fence along a boundary, a balustrade on a staircase or bars on the windows: each is steel work that secures and finishes a property, and each is something you can describe in a few measurements before you get in touch.

Umdeni Construction

Site board

Contractor
Umdeni Construction
Work
Steel work: gates, fencing, balustrades, burglar bars, gate motor installation and repairs
Area
Malbor, Sandton. Ask if your suburb is elsewhere.
Enquiries
WhatsApp or the quote form below

Frequently asked questions

What does Umdeni Construction do?

Umdeni Construction does construction and steel work: gates, balustrades, burglar bars, fencing, and gate motor installation and repairs.

Where is Umdeni Construction based?

Umdeni Construction is in Malbor, Sandton, at 3rd Street, number 54. If your property is in another area, mention your suburb when you get in touch.

Do you repair gate motors, or only install them?

Both. Gate motor installation and gate motor repairs are part of the steel work Umdeni Construction does in Sandton, along with the gates themselves.

How do I ask for a quote?

Send a WhatsApp message or fill in the quote form on this page. The planner at the top of the page helps you describe the work: the kind of steel work, rough sizes and your suburb.

What should I measure before asking for a quote?

The width of a gate opening, the length of a boundary for fencing, the length of a staircase or balcony edge for a balustrade, or the number of windows and doors for burglar bars. Photos of the spot help too.

Ask Umdeni Construction for a quote

Tell Umdeni Construction what you need: the kind of steel work, the rough size and your suburb. Use the form, or send a WhatsApp message about your gate, fencing, balustrade, burglar bars or gate motor.

Quote request

Umdeni Construction